Chapter 4 Error Indications and
Correction
4-8
4. 1. 4 Paper mis-feed in Fuser Section (J-13 and J-14)
When a paper mis-feed occurs in the Fuser Section, the Operation Panel indicates either a “J-13”
or a “J-14”.
Clear the mis-feed using the following procedure:
1) Open the Exit Cover holding two handles.
2) If it is possible to access the jammed paper, pull out the jammed paper backward gently.
MENU
ENTER
TEST
TONER REMAIN
IMAGE DENSITY
job
MENU
ENTER
TEST
TONER REMAIN
IMAGE DENSITY
job
J-13
J-14
WARNING
There are extremely hot parts inside the Heater Unit.
Do not touch any parts in the Heater Unit, or you will be burnt.
Also the mis-feed media can be very hot.
Be careful not to get burnt, when you remove it.
