Chapter 3 Advanced Operations
3-4
NOTE
(1) There are several dehumidifying settings which can be set by the service personnel.
When these setting determine, the dehumidifier functions.
With any setting, the printer must be plugged in and the switch noted above must be
in the “ON” position.
Call your service personnel if you would like to change the switch setting.
Note that the user can not change the setting.
(2) To achieve the best image quality, we recommend that you use media that is unpacked
from the manufacture right before installing it into the printer.
If media is unpacked long before installation, poor image quality may occur.
(3) Re-appearance of image (solid black image especially) may occur if you print with a
humidified film.
When film is installed and the humidity is high (higher than 60%RH), we recommend
that you turn on the Dehumidify Heater.
Normal print Abnormal print
Re-appeared image
