Chapter 3 Advanced Operations
3-2
3. 1 Changing the Density Level
If you would like to make the image darker or lighter, you will change the density level on the
scanner or controller.
After specifying the density level on the scanner or controller, it is also possible to compensate the
image density on the printer, if needed.
When density level 3 is selected (3rd from left lights), the density level specified on the scanner
or controller is used without any compensation.
To make the image darker, select the density level 4.
To make it lighter, select the level 2.
To make it much lighter, select the level 1.
(Press the Density Selection Key to change the density level.)
NOTE
If you change the density level on the scanner or controller, you can make the image darker
or lighter without any compensation on the printer.
We strongly recommend you to adjust the density level on the scanner or controller rather
than on the printer.
IMAGE DENSITY
Image Density Indicator
Density Selection Key
Level 1
Level 4
MENU
ENTER
TEST
TONER REMAIN
IMAGE DENSITY
job
Image Density Indicator
