Chapter 1 Before Use
1-5
1. 4 Specifications
Item Specification
Model Starprint
6000
Configuration Console
Printing method
LED Array Electro Photography
Photoconductor
Organic Photoconductive Drum
Print speed
100mm per second (4 E per minute)
Resolution 600dpi
Print width
Maximum width 36 inches
Minimum width 11 inches (Roll Media)
8.5 inches (Cut Sheet )
Print length
Maximum length 19.2 ft ( 6m ) (Standard)
24m or unlimited (Optional)
Minimum length 8.5 inches
NOTE : If the print is longer than 6m, we do not guarantee image
quality or the reliability of media feeding systems.
Cassette(Option)
8.5” x 11”, 11” x 8.5”, 11” x 17”, 17” x 11”, 22” x 17”, 24” x 18”
200 sheets / Cassette (Plain Paper)
Warm up time
120V = less than 8 minutes
First print time
24 seconds (E print from 1st Roll Deck)
Fusing method
Roll Fuser
Development method
Dry type with non-magnetic mono-component toner
Exposure method
LED
Charging method
Corona
Transfer method
Corona
Separation method
Corona
Media feeding method
1. Automatic (2 Roll Decks) + Manual
2. Automatic (4 Roll Decks) + Manual
3. Automatic (2 Roll Decks) + Cassette (Option)
Input power
120V plus or minus 10%, 16A and 50/60Hz
Maximum power
consumption
Dehumidify Heater is ON
0.45kwh (Stand by) / 1.54kwh (Printing)
Acoustic noise
Less than 55db (Stand by) / Less than 60db (Printing)
Ozone
Smaller than 0.1ppm (Average)
Dimensions
1420mm (Width) x 625mm (Depth) x 900mm (Height)
Weight
230kg (In case of 2 Roll Decks Model)
270kg (In case of 4 Roll Decks Model)
280kg (In case of 2 Roll Decks + 2 Cassettes Model)
Media (Recommended
Media)
Plain Paper US Bond (PB-20)
Vellum US Vellum (XV-20)
Film 4MIL (XPD-4X)
Environmental condition
for usage
Temperature 10 to 32 degrees centigrade
Humidity 15 to 85% RH
NOTE :
1. The above specifications may change without notice.
2
.
Due to the characteristics of Vellum, it is easy to be affected to the temperature or
humidity.
Under the extreme environment, such as high temperature / high humidity or low
temperature / low humidity, it may have a case of wrinkling problem if you use the
loaded Vellum Roll.
In case of this, adjust the room environment to the normal condition.
