KIP STARPRINT 6000, User Giude

Page: 18 / 74

Chapter 1 Before Use 1-11
Note: In case a Cut Sheet Paper is inserted manually, size and media are not indicated on this
Operation Panel.
Name of part Function
Toner Low Indicator Toner Low Indicator lights red when there is not enough toner in the
Developer Unit.
In case dark image is continuously printed, printing may be held
temporarily and this indicator
flashes red .
Roll Empty Indicator Roll Empty Indicator lights red when the roll media in the selected
Roll Deck is empty.
It may also light when the roll media is not correctly installed.
Paper Mis-feed Indicator Paper Mis-feed Indicator lights red when the printer or accessory
fails to feed the media.
A mis-feed code is indicated on the Display if this occurs.
Job Indicator Job Indicator lights green when the printer receives a print job from
the scanner or controller.
Ready Indicator Ready Indicator lights orange when the printer is warming up or
printing is prohibited.
It lights
green when the printer is standby or during printing.
In case printing is continuously taken, and the temperature of the
fuser goes down to a certain level, printing may be held temporarily
and this indicator
flashes green .
Display The Display normally shows green which Roll Deck is selected and
the width of the roll media in said Roll Deck.
It also indicates an error code if the printer has an error such as
“paper mis-feed” or “door open”.
Toner Remaining
Indicator Toner Remaining Volume is indicated green with every 1/4 step.
: Toner remains more than 3/4.
: Toner remains more than 2/4.
: Toner remains more than 1/4.
: Toner remains less than 1/4.
Image Density Indicator Image Density is indicated green with every 1/4 step.
(Strobe time is adjusted.)
: Darker
: Normal
: Lighter
: Lightest
Density Selection Key You may change the density level by pressing the Density Selection
Key.
Test Print Switch A test pattern will be printed out if you press the Test Print Switch.
(Service purpose only.)
Enter Key Selected job is defined. (User Mode)
* (Asterisk) Key Function selection ( User Mode )
(Right Arrow) Key Mode selection (Increment) ( User Mode )
(Left Arrow) Key Mode selection (Decrement) ( User Mode )
Menu Key Menu selection ( User Mode )