Kioti RX6030 Manual Download

Page: 83 / 252

description oF operating system

hEAD lIGhT hIGh bEAM lAMP

this lamp comes on in blue when the

high beam head light is switched on.
driving with high beam head light

disturbs an approaching vehicle’

s visibility. For safe driving, use the

high beam head light only if neces-

sary.

Tf1O412A

Tf1O411A

bATTERY ChARGING lAMP

this lamp is turned on when the

starting switch is turned on before

starting the engine but turned off af-

ter starting the engine.

CAuTION

If this warning lamp comes

on while driving, the charging

system, such as the alternator,

is malfunctioning. Therefore,

turn off all electrical devices

and have the tractor checked

by your local KIOTI Dealer or

workshop as soon as possible.

•

TF120(RX6030,7030,8030)-AU-04.in23 23

2016-06-17 오후 1:54:15

Summary of Contents for RX6030





























































































































































































































































Search results

Summary of Contents for RX6030

Reviews:

Related manuals for RX6030

Brands by name

Popular brands

Kioti RX6030, Manual

Search results

Summary of Contents for RX6030

Reviews:

Related manuals for RX6030

Brands by name

Popular brands