Kioti RX6030 Manual Download Page 134

Page: 134 / 252

rx6030 / rx7030 / rx8030

COMPONENTS FOR ADDITIONAl FRONT wEIGhT

(1) Front-end weight

(2) retaining pin

(3) Front weight mounting bolt

(4) Front weight bolt

(5) nut

A40O4D4A-1

when installing or removing a weight,

always check the tire inflation pres-

sure and adjust it as necessary.
the front weights are available at the

KIOTI

dealer. For required number

of weights, consult your local

KIOTI

dealer.

Attach only the required

amount of weight. Otherwise,

the life of the axle or wheel

can be shortened.

•

IMPORTANT

Additional weight might be

needed for transporting heavy

implements.
Reduce the speed regardless

of additional weight when driv-

ing on a bumpy or rough road

with the implement lifted. The

tractor can roll over.

•

CAuTION

H11O4E1A

(1) rear weight

ADDITIONAl REAR wEIGhT (IF EQuIPPED)

the rear weight is used to maximize

the traction of the tractor by increas-

ing the grip of the rear wheels when

using a heavy trailer or plow.

Max. load

27 kg x 10 pieces (595

lbs)

TF120(RX6030,7030,8030)-AU-04.in74 74

2016-06-17 오후 1:54:44

Summary of Contents for RX6030





























































































































































































































































Search results

Summary of Contents for RX6030

Reviews:

Kioti RX6030, Manual, Page: 134 / 252

Search results

Summary of Contents for RX6030

Reviews: