Kioti RX6030 Manual Download

Page: 114 / 252

rx6030 / rx7030 / rx8030

The rear window may not be

opened due to an implement.

Make sure to check if there is

enough space to open the win-

dow to prevent damage and

breakage by an implement.

Never drive the tractor with

the door open. An accident

can occur.

•

wARNING

do not leave the doors fully open

while driving the tractor. side win-

dows can be partially open to vent

the cab.

(1) side window

T11O466A

SIDE wINDOw

wORKING lIGhT

(1) working light switch (Front)

the working lights are installed to the

front and rear sections of the roof,

and their operating buttons are in-

stalled in the right panel in the cabin.
to turn on, position the switch marked

(front) to the "on" position.
the key switch should be positioned

to the "on" position to power the

working lights.

Tf1O444A

TF120(RX6030,7030,8030)-AU-04.in54 54

2016-06-17 오후 1:54:37

Summary of Contents for RX6030





























































































































































































































































Search results

Summary of Contents for RX6030

Reviews:

Related manuals for RX6030

Brands by name

Popular brands

Kioti RX6030, Manual

Search results

Summary of Contents for RX6030

Reviews:

Related manuals for RX6030

Brands by name

Popular brands