Kioti RX6030 Manual Download

Page: 36 / 252

rX6030 / rX7030 / rX8030

decals

3. part no. : t4930-52391

CAUTION

1. To use an implement that uses external hydraulic pres-

sure, such as a front loader, check the transmission

fluid amount. If it is insufficient, add the fluid before its

operation.

2. Lower the bucket onto the ground before stopping the

engine. Otherwise, it can cause an accident or injury.

2. part no. : t4182-53191

1. part no. : t4710-52201

WARNING

► Do not operate any part outside the vehicle other

than installation and removal of an implement.

► Make sure to set all the levers in their neutral posi-

tion and apply the parking brake before working on

level ground.

►Turn OFF the P.T.O switch before working the tractor.

►Working the tractor with the engine at a high speed

can cause the attached implement moving up,

down, left or right abruptly. Make sure to run the

engine at a low speed and secure a safe distance

before working on a ﬁeld.

Lifting

Lowering

Precautions during rocker switch operation

5. part no. : t4930-52371

WARNING

Do not remove the radiator cap when the

engine is running or while the engine is hot.

If the radiator cap is removed, hot vapor or

liquid may be violently released causing burns.

WARNING

T4182-53191

TO AVOID POSSIBLE INJURY,

DEATH OR LOSS OF PROPERTY FROM A MACHINE RUNAWAY

- With the engine off, unexpected machine movement could result

regardless of the gearshift position.

- Before dismounting the machine, apply the parking brake to

prevent machine runaway.

4. part no.: t4938-52321

(Caution) Release the parking brake when driving otherwise

it would cause early abrasion of brake disk, overheating

of transmission and problems in hydraulic part.

* Be sure to pull the parking brake up

when parking or stopping.
* Pull the brake lever up to set the

parking brake.
* Push the brake lever down while

pushing the button to release the

parking brake

WARNING

T4938-52321

TF120(RX6030,7030,8030)-AU-01.in24 24

2015-10-29 오후 6:38:00

Summary of Contents for RX6030





























































































































































































































































Search results

Summary of Contents for RX6030

Reviews:

Related manuals for RX6030

Brands by name

Popular brands

Kioti RX6030, Manual

Search results

Summary of Contents for RX6030

Reviews:

Related manuals for RX6030

Brands by name

Popular brands