manualshive.com logo in svg

Kioti RX6030, Manual

The Kioti RX6030 is a powerful agricultural tractor designed to handle various tasks with ease. This manual provides comprehensive instructions, maintenance guidelines, and troubleshooting tips to maximize its performance. Easily downloadable for free from our website, manualshive.com, ensure you have the essential user manual for operating and maintaining your Kioti RX6030.

Share
Download
background image

7

-

maintenance

7

sERVICE sChEDUlE

MAINTENANCE  

CODEs

ITEM

sERVICE REQUIRED

engine oil

Check the oil level and add as needed. Do not overfill.

D

hydraulic (trans / Diff.) fluid

check level and add as needed.

c

engine air filter and air in-

take system

check for leaks and damaged components. Do not use compressed air to clean 

elements.

r

engine cooling system

clean debris from oil cooler, radiator screen and grills. check coolant level cold, 

add premixed coolant as needed.

e, f, ab

seat belt

check the condition of seat belt and mounting hardware. repair or replace as needed.

tires

check for wear, damaged tires and ensure for proper sized tires and correct air pressure.

parking brake

check operation and adjust if required.

clean pedals

clean brake pedals, travel control pedal, clutch pedal and footrest area.

n

general items

check for loose or broken parts, damaged operator cab, instrument operation, 

loose wheel nuts / bolts, oil leaks and damaged or missing signs (Decals).      

p, af, ag, ak

pto

inspect the splines. replaced damaged or missing shields and guards.

three-point linkage

check operation and condition of pins, links and bars.

loader (if equipped)

check mounting hardware for loose or broken parts.  

MAINTENANCE ChECk lIsT

DAIly ChECk ChART

※

  for detailed information about maintenance codes, refer to the corresponding section in each chapter.

TF120(RX6030,7030,8030)-AU-07.in3   3

2016-06-17   오후 1:55:34

Summary of Contents for RX6030





























































































































































































































































Reviews:

No comments

Related manuals for RX6030

David Brown 770 Shop Manual preview
770
Brand: David Brown Pages: 93
Ditch Witch ht25 Service Manual preview
ht25
Brand: Ditch Witch Pages: 103
Kubota STV32 Operator'S Manual preview
STV32
Brand: Kubota Pages: 102
Kubota MX5200 Operator'S Manual preview
MX5200
Brand: Kubota Pages: 115
Ariens A19A42 Operator'S Manual preview
A19A42
Brand: Ariens Pages: 30
GOLDONI TOSAPRATO TP60 Operation And Maintenance preview
TOSAPRATO TP60
Brand: GOLDONI Pages: 30
MAGNATRAC MH7000 Operator / Technical Manual preview
MH7000
Brand: MAGNATRAC Pages: 86
Zetor FORTERRA HSX Series Operator'S Manual preview
FORTERRA HSX Series
Brand: Zetor Pages: 222
Jenn-Air TC607X Use & Care Manual preview
TC607X
Brand: Jenn-Air Pages: 28
Jenn-Air W10242571A Use And Care Manual preview
W10242571A
Brand: Jenn-Air Pages: 28
FENDT Vario 712 Operating Manual preview
Vario 712
Brand: FENDT Pages: 6
Belle Group BMD 300 Operator'S Manual preview
BMD 300
Brand: Belle Group Pages: 200
Grouser Products AG PRO PLUS NANT Owner'S Manual & Parts Book preview
AG PRO PLUS NANT
Brand: Grouser Products Pages: 20
Wheel Horse B-111 Owner'S Manual preview
B-111
Brand: Wheel Horse Pages: 36
Wheel Horse 200 Series Operator'S Manual preview
200 Series
Brand: Wheel Horse Pages: 38
Wheel Horse D-250 Repair Manual preview
D-250
Brand: Wheel Horse Pages: 110
EMAK EF102C/15,5H Operator'S Manual preview
EF102C/15,5H
Brand: EMAK Pages: 160
Kubota BX1880 Installation Manual preview
BX1880
Brand: Kubota Pages: 40

Brands by name

Popular brands

Load more brands