Kioti RX6030 Manual Download

Page: 204 / 252

rx6030 / rx7030 / rx8030

(1) element

(2) cap

(3) evacuator valve

1. the air cleaner uses a dry ele-

ment. never apply oil.

2. Dust should not accumulate in the

dust cap or element. remove and

clean the dust cap and the ele-

ment every week. if the tractor is

operated in extremely dusty condi-

tions, daily inspection is required.

3. Do not touch the filter element

except in cases where cleaning is

required.

REPLACINg AIR CLEANER PRIMARy ELEMENT (R)

Proper clutch pedal free play (A)

20 ~ 30 mm (0.8 ~ 1.2 in.)

T11O711A

2. to adjust the play, unscrew the

lock nut and adjust the clutch cable

3. after setting the play properly,

tighten the lock nut firmly.



The air cleaner will only fulfill

its function if it is correctly and

regularly maintained. A poorly

maintained air cleaner will

mean loss of power, excessive

fuel consumption and a reduc

tion in engine life.



Do not run the engine with fil

ter element removed.



Be sure to refit the cap with

the arrow (on the rear of

cover) upright. If the cap is im

properly fitted, evacuator valve

will not function and dust will

adhere to the element.

4. when cleaning the element, refer

to the instructions that follow.

to clean the element, use only clean

dry compressed air on the inside of

the element. air pressure at the nozzle

must not exceed 29 psi (2 kgf/cm²).

maintain reasonable distance between

the nozzle and the filter.

IMPORTANT

TF120(RX6030,7030,8030)-AU-07.in22 22

2016-06-17 오후 1:55:43

Summary of Contents for RX6030





























































































































































































































































Search results

Summary of Contents for RX6030

Reviews:

Related manuals for RX6030

Brands by name

Popular brands

Kioti RX6030, Manual

Search results

Summary of Contents for RX6030

Reviews:

Related manuals for RX6030

Brands by name

Popular brands