Kioti RX6030 Manual Download

Page: 171 / 252

3-poInt HItcH ImpLement And LoAdeR opeRAtIon

ADjUsTMENT Of sTABILIzER

M55O612A

1. Adjust the check link to control

horizontal sway of the implement.

It is also used to set the implement

on the back of the tractor in center.

2. to adjust the check link, pull out

the pin and adjust it until the de-

sired transverse moving distance

is obtained.

3. fit the pin to the gardening hole

(fixed) for normal operation and

long hole (moving) for draft work.

(1) check Link

(2) pin

DIsMOUNTINg THE IMPLEMENT

1. park the tractor with the implement

on level ground and lower the

implement all the way down.

Install the implement support as

needed.

2. disconnect the top link and lower

links from the implement by re-

moving the pins.

3. be sure to insert the set pins, lynch

pins and snap pins back to the

implement securely to keep those

safe.

4. stop the engine and move the re-

mote hydraulic control lever back

and forth to relieve the hydraulic

pressure in the system before dis-

connecting hydraulic couplers.

5. put the top link back to its hook.

Hold both lower links together with

a rubber "strap" or "tie down". oth-

erwise, the lower links can contact

with rear tires and cause damage

to the lower links and tires while

driving.

DRAw BAR AND TRAILER

(1) draw bar

M55O621A

the draw bar is used to pull an im-

plement, such as a trailer. make sure

to check the max. towing weight of

the trailer and max. vertical load that

can be applied to the draw bar.
- max. trailer weight (t loaded

weight) = 3,000 kg (6,614 lbs)

- vertical load on the draw bar

= 750 kg (1,653 lbs)

TF120(RX6030,7030,8030)-AU-06.in7 7

2015-10-29 오후 2:26:35

Summary of Contents for RX6030





























































































































































































































































Search results

Summary of Contents for RX6030

Reviews:

Related manuals for RX6030

Brands by name

Popular brands

Kioti RX6030, Manual

Search results

Summary of Contents for RX6030

Reviews:

Related manuals for RX6030

Brands by name

Popular brands