Kioti RX6030 Manual Download Page 91

Page: 91 / 252

description oF operating system

SPEED lIMIT SwITCh

this speed limit switch

is to maintain

the operating speed constant.
in this case, the speed limit lamp in

the cluster meter.

TE3O437A

NOTE

when working in a narrow

space, turning the switch “on”

with the hst forward driving

pedal depressed can maintain

the constant speed. depressing

the pedal to its deepest position

does not accelerate the vehicle,

but still maintains the speed con-

stant in the “on” position.

•

TE3O436A

CRuISE CONTROl SwITCh

to activate the cruise control function,

set the desired speed and press the

switch to the “on” position.
in this case, the speed limit lamp in the

cluster meter.
depress the hst pedal to increase the

driving speed in order to accelerate at a

constant speed. to deactivate the cruise

function, depress the brake pedal or

press the switch to the “oFF” position.
the cruise function is not activated dur-

ing reverse.

TF120(RX6030,7030,8030)-AU-04.in31 31

2016-06-17 오후 1:54:22

Summary of Contents for RX6030





























































































































































































































































Search results

Summary of Contents for RX6030

Reviews:

Related manuals for RX6030

Brands by name

Popular brands

Kioti RX6030, Manual

Search results

Summary of Contents for RX6030

Reviews:

Related manuals for RX6030

Brands by name

Popular brands