Kingston Technology DataTraveler 4000 G2, User Manual

Page: 6 / 405

Document No. 48000127-001.A04 DataTraveler
®
4000 G2 Page 5 of 27
2. Review the licence agreement and click ‘
Next ’ ( Figure 3.2 .) ( Note: You must accept the licence
agreement before continuing; otherwise the ‘Next’ button will remain disabled ).
Figure 3.2 – Licence Agreement
3. Create a password to protect your data on the DT4000 G2. Enter it in the ‘
Password ’ field, then re-
enter it in the ‘ Password Confirmation ’ field, as seen below in Figure 3.3 . The password that you
create must meet the following criteria before the initialisation process will allow you to continue:
1. Passwords must contain 8 characters or more (up to 16 characters).
2. Passwords must contain three (3) of the following:
- UPPER CASE, lower case, numeric and/or special characters (!, $, etc.)
You may also enter a password hint, but it is not a mandatory field. The hint field can be useful in
providing a clue as to what the password is, should the password ever be forgotten. (
Note: The hint
CANNOT be an exact match to the password. )