Kingston Technology DataTraveler 4000 G2, User Manual

Page: 4 / 405

Document No. 48000127-001.A04 DataTraveler
®
4000 G2 Page 3 of 27
Figure 1.1 – Recommended Usage Figure 1.2 – Not Recommended
*Note: See ‘Drive Letter Conflict’ on page 26.
Setup (Windows Environment)
1. Insert the DT4000 G2 into an available USB port
on your notebook or desktop and wait for
Windows to detect it.
•
Windows Vista users will receive a device
driver notification as seen in
Figure 2.2
.
•
Windows 7 users will receive a device driver
notification as seen in
Figure 2.2
.
Once the new hardware detection is complete,
Windows will prompt you to begin the initialisation
process.
•
Windows Vista users will see an AutoPlay
window similar to the one in
Figure 2.3
.
•
Windows 7 users will see an AutoPlay window
similar to the one in
Figure 2.3
.
2. Select the option ‘
Run DT4000 G2_Launcher.exe
’.
If Windows does not AutoPlay, you can browse to
the CD-ROM partition (
Figure 2.4
) and manually
execute the DT4000 G2_Launcher program. This
will also start the initialisation process.
Figure 2.1 – Found New Hardware
(Windows Vista)
Figure 2.2 – Device Driver Installation
(Windows 7)