21
MAINTENANCE & CLEANING
Turn off the POWER before performing maintenance and cleaning.
CLEANING AND MAINTENANCE THE BRUSH
Using the dry cotton to wipe the brush to remove the dust, Swing the brush by hand
and adjust the height of the brush to make the brush in touch with screw heads.
Replace the brush when brush hair is too worn and cannot wipe down screws in an
improper position.
CLEANING AND MAINTENANCE THE RAIL
Withdraw the rail assembly, clean the rail groove and top of the rail (area for screws
flow) with a clean thin cotton cloth soaked with alcohol or benzene. Use the Allen Key
to check if the screws for the parts of rail assembly are fastened.
INTERIOR CLEANING
After cleaning the rail assembly, take out any screw or foreign material inside of
machine, and clean whole interior parts, walls particularly the motor, PCB and gear to
prevent effecting against machine functions.
OPTIONAL PARTS
：
Please use genuine parts to ensure products quality and avoid influences caused
against performance of this machine.
REMARK
：
When using screw of special types or other than specified, please consult our
distributors.
