19
delay time setting,
，
LED flashes and display as
，
press UP or Down button
to change the setting of delay time
（
system defaults time of roller delay time is based on the
property of screw type
，
setting range as 01~12s
）
，
Press the OK button within 3sec or 3sec does
not press the button; The system confirms the completion of the setting and makes a beep.
3.7 In the standby or working state, press SET button 7 times to enter the system of roller
strength setting
，
LED flashes and display as
，
press UP or Down button to
change the setting of strength value
（
system defaults strength of roller is based on the property
of screw type, setting range as 01~10, 5V~10V, 10 steps in total, every 0.5V as 1 step
），
Press
the OK button within 3sec or 3sec does not press the button; The system confirms the
completion of the setting and makes a beep.
3.8 In the standby or working state, press SET button 8 times to enter the system of turntable
strength setting, LED flashes and display as
，
press UP or Down button
to change the setting of speed value
（
system defaults strength is based on the property of
screw type, setting range as
01~10
），
Press the OK button within 3sec or 3sec does not press
the button; The system confirms the completion of the setting and makes a beep.
3.9 In the standby or working state, press SET button 12 times to enter the system of
Vibration direction Forward or reverse setting
，
LED flashes and display as
，
00 as forward
，
01 as reverse
，
press UP or Down button to change the
setting
（
system defaults as 00
），
Press the OK button within 3sec or 3sec does not press the
button; The system confirms the completion of the setting and makes a beep.
