14
Adjust the Brush
1. Swing the brush to stay almost horizontal, loosen screw on the side of brush bracket.
2.
Place 5~8 screws into the rail groove close to the holding plate rear end and loosen 2 screws
on the side of the brush bracket. Swing the brush and adjust the height until the brush just
touch the screw heads slightly, and tighten the screws after adjustment.
3.When fix the brush position, keep suitable space form the Front Plate and Fixing Plate.
4.
Brush bracket and driving rod must be parallel and fix to the
center.
※
NOTICE
※
a.
After adjustment of the
height of the brush, swing
the brush by hand to
make sure the movement
runs smoothly.
b.
The brush length is
inconsistently, please
ensure the brush match
rail when replace it.
