8
3.
Set the lock gate, keep 0.2~0.5mm open space between gate to rail
assembly.
4.
Loosen the fixing screw of rail assembly. Keep 0.2~0.5mm open space
between the front end of rail assembly and circled plate. Then fasten the
screws.
※
NOTE THE FOLLOWING WHEN MAKING ABOVE ADJUSTMENT
※
a. When inserting the rail assembly, it must keep 0.2~0.5mm open space from the
circled plate.
b. When the rail can
’
t be installed, please check if the position of V chase is installed too
low.
c. Keep 0.2~0.5mm open space between the lock gate and rail assembly.
0.2~0.5mm
