PMX_MULTI
User’s Manual
31
Basic Functions | Output Operation
If you press DELAY while the “DELAY” indicator is blinking, the output-on delay/ off delay operation is can-
celed, and the output of all channels is turned off. If you want to resume the output-on delay/ off delay
operation, press DELAY (the “DELAY” indicator appears).
If you press DELAY when the output of all channels is on after an output-on delay operation, the delay
function will be cleared. If you press OUTPUT ALL in this condition, the output of all channels is turned off
without an off-delay operation.
The actual rise time at output-on and the fall time at output-off very depending on the output and load con-
ditions. The timing charts above ignore the rise and fall times.
Because there is time for internal processing from when OUTPUT ALL is pressed until the output actually
turns on or off, even if you set the delay time 0 s, there will be an error in the order of tens of milliseconds.
Parameter
On-delay
value
Off-delay
value
CH1
0 s
4 s
CH2
4 s
0 s
CH3
2 s
2 s
CH4
2 s
6 s
CH1
CH2
CH3
CH4
2
0
4
2
0
4
6
Delay
Time (s)
On-delay time
Off-delay time
On-delay time
Off-delay time
źLVZKHQWKH287387$//NH\LVSUHVVHG
2XWSXWRQ
2XWSXWRII
3UHVVLQJ'(/$<ZKLOHRXWSXWRQRIILVLQSURJUHVV
FOHDUVWKHGHOD\IXQFWLRQDQGWXUQVWKHRXWSXWRII
CH1
CH2
CH3
CH4
2
0
4
2
0
4
6
Delay
Time (s)
2XWSXWRQ
'HOD\IXQFWLRQ
&OHDU
2XWSXWRII
LVZKHQWKH'(/$<NH\LVSUHVVHG
Example of PMX32-2QU
