manualshive.com logo in svg

KidKraft NEWPORT PLAYSET F29015, Installation And Operating Instructions Manual, Page: 37 / 57

Share
Download
KidKraft NEWPORT PLAYSET F29015 Installation And Operating Instructions Manual Download Page 37

Step 20:  Attach Chalk Wall Tarp to Fort 

Part 1

A:

  On the back of the assembly, from the inside, tuck Chalk Wall Tarp between (1980) Top Front Back and both 

(1500) Posts and between (1913) Back Floor and both (1500) Posts. (fig. 20.1)

B:

  Make sure Chalk Wall Tarp is smooth and tight. Attach to the outside of each (1500) Post, 1/2” in from the 

edge of the tarp, with 4 (S5) #8 x 1/2” Pan Screws (with #8 flat washer) per post making sure that the second 

screw from the top is 8” down as shown in fig. 20.2.

C:

  Attach Chalk Wall Tarp to (1980) Top Front Back and (1913) Back Floor, from the inside of the assembly and 

1/2” in from the edge of the tarp, using 4 (S5) #8 x 1/2” Pan Screws (with #8 flat washer) per board. (fig. 20.2)

D:

  Tighten the screws in (1980) Top Front Back and the bolts in (1912) Back Divider from Step 19.

Hardware

Other Parts

S5

1 x Chalk Wall Trap

Fig.  20.1

Fig.  20.2

1913

1500

1500

S5

S5

#8 Flat 

Washer

#8 Flat 

Washer

x 4 

per 

post

x 4 per 

board

8”

Chalk 

Wall Tarp

Chalk 

Wall Tarp

16 x 

#8 x 1/2” Pan Screw

 

(#8 flat washer)

1980

1/2” in from 

the edge of 

the tarp

1/2” in from 

the edge of 

the tarp

 37 

        

[email protected]

   

Summary of Contents for NEWPORT PLAYSET F29015


























































Reviews:

No comments