Step 6: Swing Wall Assembly
Part 1
A:
Attach (1928) Lower Side, noticing the side the bolt hole on the extended end is on, using 4 (H2) 1/4 x 2” Hex
Bolts (with lock washer, flat washer and t-nut); (1924) SW Floor (in the bottom holes) and (1925) SW Top using 2
(H2) 1/4 x 2” Hex Bolts (with lock washer, flat washer and t-nut) for each board to 2 (1500) Posts. (fig. 6.1)
Note: Keep all bolts loose.
B:
On the side indicated in fig. 6.1, attach (0369) Lower Diagonal to (1928) Lower Side with 1 (H2) 1/4 x 2” Hex
Bolt (with lock washer, flat washer and t-nut).
Wood Parts
Hardware
1 x
SW Floor 1 x 6 x 26-7/8”
1 x SW Top 1 x 4 x 36”
1 x Lower Side 1 x 5 x 59-11/16”
1 x Lower Diagonal 2 x 3 x 37”
2 x Post 2 x 4 x 83”
1924
1925
1928
0369
1500
9 x
1/4 x 2” Hex Bolts
(1/4” lock washer, 1/4” flat washer and 1/4” t-nut)
H2
Fig. 6.1
Step 6 Part 1
1924
1500
1925
0369
1928
H2
H2
H2
1/4” Lock
Washer
1/4” Flat
Washer
1/4”
T-Nut
1/4”
T-Nut
Notice bolt holes
on this side
Notice the hole
locations of (1924)
SW Floor.
19