Step 5: Cafe Wall Assembly
A:
Attach (1914) Cafe Ground with 4 (H2) ¼ x 2” Hex Bolts (with lock washer, flat washer and t-nut); (1760)
Floor using 2 (H2) ¼ x 2” Hex Bolts (with lock washer, flat washer and t-nut) in the bottom holes, noticing hole
locations; (1923) Side Top with 2 (H2) ¼ x 2” Hex Bolts (with lock washer, flat washer and t-nut) and (1981) Top
Side with 2 (H2) ¼ x 2” Hex Bolts (with lock washer, flat washer and t-nut) to 2 (1500) Posts as shown in fig. 5.1,
5.2 and 5.3.
Note: Pre-drill all holes using a 1/8” drill bit before installing the lag screws.
B:
Make sure assembly is square and then fasten (1760) Floor to (1500) Posts in the top holes using 2 (LS1) ¼
x 1-1/2” Lag Screws (with flat washer). (fig. 5.1 and 5.3)
Wood Parts
Hardware
1 x
Cafe Ground 1 x 5 x 41-1/2”
2 x Post 2 x 4 x 83”
1 x Floor 1 x 6 x 26-7/8”
1 x Side Top 1 x 4 x 26-7/8”
1 x Top Side 1 x 4 x 36”
1914
1500
1760
1923
1981
10 x
1/4 x 2” Hex Bolts (1/4” lock washer, 1/4” flat washer and 1/4” t-nut)
2 x
1/4” x 1-1/2” Lag Screws (1/4” flat washer)
H2
LS1
Fig. 5.1
Fig. 5.2
Fig. 5.3
1914
1981
1914
1760
H2
1500
1500
1500
1500
1760
1923
H2
H2
LS1
LS1
H2
1/4” Lock
Washer
1/4” Lock
Washer
1/4” Flat
Washer
1/4” Flat
Washer
1/4”
T-Nut
1/4”
T-Nut
H2
H2
Notice the
hole
location
18