manualshive.com logo in svg

KidKraft NEWPORT PLAYSET F29015, Installation And Operating Instructions Manual, Page: 36 / 57

Share
Download
KidKraft NEWPORT PLAYSET F29015 Installation And Operating Instructions Manual Download Page 36

A

Step 19:  Back Wall Frame Assembly

A:

  Attach (1912) Back Divider to (1913) Back Floor with 1 (H2) 1/4 x 2” Hex Bolt (with lock washer, flat washer 

and t-nut). 

Keep bolt loose.

 (fig 19.1 and 19.2)

B:

  Attach (1980) Top Front Back to (1912) Back Divider with 1 (H2) 1/4 x 2” Hex Bolt (with lock washer, flat 

washer and t-nut). 

Keep bolt loose.

 (fig. 19.1 and 19.2)

C:

  Make sure (1980) Top Front Back is level then loosely attach to both (1500) Posts with 4 (S7) #12 x 2” Pan 

Screws (with 3/16” flat washer). 

Keep the screws loose.

 (fig. 19.1 and 19.2)

Hardware

Wood Parts

S7

1 x 

Back Divider 2 x 2 x 59-3/8”

1 x 

Top Front Back 1 x 4 x 38-1/2”

1912

1980

Fig.  19.2

Fig.  19.1

1/4” Flat 

Washer

1/4” Lock 

Washer

2 x 

1/4 x 2” Hex Bolt

 

(1/4” lock washer, 1/4” flat washer, 1/4” t-nut)

4 x 

#12 x 2” Pan Screw

 

(with 3/16” flat washer)

H2

A

1980

S7

3/16” Lock 

Washer

1/4” Flat 

Washer

1/4” Lock 

Washer

1500

S7

3/16” Lock 

Washer

1500

1912

H2

1912

1913

1500

1980

 36 

        

[email protected]

   

Summary of Contents for NEWPORT PLAYSET F29015


























































Reviews:

No comments