Step 7: Fort Frame Assembly
A:
On the front of the assembly side without the (0369) Lower Diagonal, attach (1764) Floor Front to both (1500)
Posts, noticing the bolt holes are towards the bottom of the board, with 2 (H6) 1/4 x 4-3/4” Hex Bolts (with lock
washer, flat washer and t-nut). (fig. 7.1 and 7.2)
B:
On the back side of the assembly attach (1913) Back Floor to both (1500) Posts, noticing the middle bolt hole
is oriented towards the bottom, with 2 (H4) 1/4 x 4” Hex Bolts (with lock washer, flat washer and t-nut) in the
bottom holes. (fig. 7.1 and 7.2)
C:
Make sure (1913) Back Floor is level and square to the posts, then attach with 2 (S7) #12 x 2” Pan Screws
(with 3/16” flat washer). (fig. 7.1 and 7.2)
Wood Parts
Hardware
1 x
Floor Front 2 x 3 x 38-1/2”
1 x Back Floor 1 x 6 x 38-3/4”
1764
1913
2 x
1/4 x 4-3/4” Hex Bolts (1/4” lock washer, 1/4” flat washer and 1/4” t-nut)
2 x
1/4 x 4” Hex Bolts (1/4” lock washer, 1/4” flat washer and 1/4” t-nut)
2 x
#12 x 2” Pan Screws (3/16” flat washer)
H6
H4
Fig. 7.2
Fig. 7.1
0369
H6
S7
S7
S7
1/4” Lock
Washer
1/4” Flat
Washer
3/16” Flat
Washer
1/4”
T-Nut
S7
A
A
1913
1764
1500
1913
1500
H4
H4
1764
H6
21