46
2 x
Heavy SW Post
1 x
SW Upright
1 x
SW Support
Step 12: Swing End Assembly
A:
Loosely attach 2 (2613) Heavy SW Posts to (2615) SW Upright using 2 (G7) Hex Bolts (with LW2 lock
washer, FW2 flat washer and TN2 T-nut). Notice 2 bolt holes at top of (2615) SW Upright and orientation of
angle. (fig. 12.1)
B:
Attach (2616) SW Support to both (2613) Heavy SW Posts and (2615) SW Upright using 3 (G4) Hex Bolts
(with LW2 lock washer, FW2 flat washer and TN2 T-nut). Tighten all bolts (fig. 12.1)
C:
Install 2 (WB7) Wafer Bolts (with FW2 flat washer and TN2 T-nut) in the top bolt holes in (2615) SW Upright
as shown in fig. 12.1.
IT IS IMPORTANT THAT THESE BOLTS ARE ATTACHED. THEY WILL MINIMIZE
CHECKING OF WOOD.
Hardware
Wood Parts
2 x
Hex Bolt (LW2 lock washer, FW2 flat washer, TN2 T-nut)
3 x
Hex Bolt (LW2 lock washer, FW2 flat washer, TN2 T-nut)
2 x
Wafer Bolt (FW2 flat washer & TN2 T-nut)
G7
WB7
G4
Notice 2 bolt
holes at top and
orientation of
the angle
WB7
Fig. 12.1
2613
2615
2613
2615
2616
G7
2616
G4
TN2
FW2
TN2
TN2
FW2
FW2
LW2
LW2
Summary of Contents for Cedar Summit F29380
Page 15: ...15 9 mm mm Actual Size...
Page 119: ...119 NOTES...