71
Step 28: Crowsnest Assembly
Part 1
A:
On flat level ground, lay out (2337) Crowsnest Back and (2345) Porch Floor End so they face each other.
Using the pilot holes as a guide place 2 (2340) Crowsnest Joists flush to the outside edges of (2337) Crowsnest
Back. Make sure the assembly is square then attach joists to (2337) Crowsnest Back with 2 (S3) #8 x 2-1/2”
Wood Screws and to (2345) Porch Floor End with 2 (S4) #8 x 3” Wood Screws, per joist. (fig. 28.1)
B:
Measure 12” from the outside edge of one (2340) Crowsnest Joist and place 1 (2340) Crowsnest Joist at
measured spot. Make sure assembly is square then attach to (2337) Crowsnest Back with 2 (S3) #8 x 2-1/2”
Wood Screws and to (2345) Porch Floor End with 2 (S4) #8 x 3” Wood Screws. (fig. 28.1)
This creates the Crowsnest Bottom Assembly.
Hardware
Wood Parts
3 x
Crowsnest Joist 2 x 4 x 8-5/8”
1 x
Crowsnest Back 5/4 x 4 x 25-1/2”
1 x
Porch Floor End 2 x 4 x 38-1/2”
2340
6 x
#8 x 2-1/2” Wood Screw
6 x
#8 x 3” Wood Screw
S4
S3
2337
2340
Outside View
Fig. 28.1
2337
2340
2345
S3
S4
2345
12”
Flush
Flush
Summary of Contents for BOULDER STATION
Page 98: ...98 NOTES...
Page 99: ...99 NOTES...