Kguard SHA28 User Manual Download Page 77

Page: 77 / 88

ENGLISH

Chapter 5: KGuard Web Client

DVR User’s Manual

5.6 Local Settings

Use the Local Setting menu to specify the local path directory to save downloaded videos, files, and snapshots.

To configure the local settings, do the following:

On the Main Menu, click

Local Setting

Click the corresponding browse

button to modify the path.

Menu item

Description

Record Save Path

All manual recording made from the Live screen are saved in this path.
See

“b. Recording Channels Manually”

on page 57.

Snapshot Save Path

All captured screen shots made from the Live screen are saved in this path.
See

“c. Taking Snapshots”

on page 57.

File Save Path

All downloaded videos from the Playback screen are saved in this path.

See

“5.4.2 Downloading Recorded Videos” on page 61

Summary of Contents for SHA28

























































































Search results

Summary of Contents for SHA28

Reviews:

Related manuals for SHA28

Brands by name

Popular brands

Kguard SHA28, User Manual

Search results

Summary of Contents for SHA28

Reviews:

Related manuals for SHA28

Brands by name

Popular brands