ENGLISH
Chapter 5: KGuard Web Client
DVR User’s Manual
69
Setting Up with PPPoE
If your network uses the Point-to-Point Protocol over Ethernet (PPPoE), do the following:
1
On the Main Menu, click
Remote Setting
.
2
On the left panel, click
Network
>
PPPoE
. The PPPoE screen appears.
3
Enable
PPPoE
.
4
Enter the
User Name
and
Password
.
Note:
Obtain these information from your network administrator or your Internet Service Provider (ISP).
5
To save, click
Apply
at the bottom of the screen.
«
TIP
»
• To revert to default settings, click
Default
at the bottom of the screen.
• To cancel any modifications and retain the existing settings, click
Refresh
at the bottom of the screen.
Setting Up DDNS
DDNS (Dynamic DNS) is a service that registers a domain name and the floating IP address with a DDNS server so that
the domain name can be routed to the IP address even if the IP is changed in a dynamic IP system.
To use this feature, you must have a DDNS account. Obtain the information from your Internet Service Provider (ISP) or
create a free DDNS account with KGuard.org server, visit
http://www.kguard.org
.
To setup DDNS, do the following:
1
On the Main Menu, click
Remote Setting
.
2
On the left panel, click
Network
>
DDNS
. The DDNS screen appears.
3
Enable
DDNS
.
4
On
Service
, select the DDNS server.
