Kguard SHA28 User Manual Download Page 39

Page: 39 / 88

ENGLISH

Chapter 4: Using the DVR

DVR User’s Manual

4.3.2 Backing up Videos

Plug a USB device into the USB connector at the front panel or the rear panel of the device.

In preview mode, right-click on the mouse to display the Pop-up menu.

Select

Main Menu

SEARCH

Specify the date, then click

Search

To view the file details, click

Detail Files

. All recorded files and details on all channels are displayed on the screen.

To browse the files according to its category, select one of the video types (Alarm/Normal/All).

To browse the next or previous page, click

Next

Previous

Select the files that you want to back up. A

√

icon appears on the check box to indicate that the file has been

selected.

Click

Backup

When data backup is complete, click

Note:

Do not remove the USB device while file transferring is in progress.

Summary of Contents for SHA28

























































































Search results

Summary of Contents for SHA28

Reviews:

Related manuals for SHA28

Brands by name

Popular brands

Kguard SHA28, User Manual

Search results

Summary of Contents for SHA28

Reviews:

Related manuals for SHA28

Brands by name

Popular brands