ENGLISH
Chapter 4: Using the DVR
46
DVR User’s Manual
Note:
For details on supported mobiles, see
“DVR SHA Series Support Manual”
in the enclosed CD.
4.4.5 Setting Motion Detection
For added security, enable the motion detection feature. When motion is detected on a selected area, the DVR issues
an alarm notification.
To configure motion detection, do the following:
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select
Main Menu
>
DEVICE > MOTION
.
3
In
Channel
, select the channel to activate motion detection.
3
In
Motion Detection
, select
Enable
.
4
In
Sensitivity
, select the motion sensitivity from 1 to 8, wherein in 1 is the least sensitive and 8 the most sensitive.
5
Click
Setup
.
6
A grid screen with a green cursor appears. By default, the whole screen is marked for motion detection (red block).
If you want to disable motion detection on an area, click the grid cursor and then drag the mouse to highlight the
scope to unmark the area (transparent block) for motion detection.
7
To close the grid screen, click the right mouse button.
8
After all settings are complete, click
Apply
.
9
When data saving is complete, click
OK
.
When motion detection is enabled on a channel, the channel screen displays the motion detection icon
M
.
«
TIP
»
To copy the current settings to other channels, select the channel(s) in
Copy To
and then click
Copy
.
