Keysight M8100A Series Arbitrary Waveform Generators Getting Started Guide
35
Basic Setup for M8100A
2
Case 4
Connecting M8008A clock module to four M8199A AWG modules
In this case, a M8008A clock module, four M8199A AWG modules, two
M9505A AXIe chassis and the following cables are required:
• Sync cable (M8199-61620)
• Clock cable (M8199-61624), MWX261 1.85/1.85 (m/m), 450mm
Make the connections as described below:
1 Connect the M8008A Clock Generator Sync Out port with all the four
M8199A AWG Sync In ports using sync cable (blue cable).
2 Connect the M8008A Clock Generator Sample Clock Out port with all
the four M8199A AWG Clock In ports using clock cable (red cable).
on page -35 shows how to connect M8008A clock generator
module to the four M8199A AWG modules:
Figure 13
Connecting M8008A clock generator to four M8199A AWG modules
M8008A
M8199A
M8199A
