Keysight M8100A Series Arbitrary Waveform Generators Getting Started Guide
43
Basic Setup for M8100A
2
Step 15 - Enabling/Disabling the Interleaving Mode
There are two different interleaving (ILV) modes:
•
Non interleaved
: This mode is active when no combiner serial no. is
registered, and no remote head is connected.
•
Interleaved
: This mode is active when a combiner serial no. is
registered, or a remote head is connected. Interleaved mode is active
when a remote head is connected even though no combiner serial no. is
registered. The connection of a remote head is only checked at startup.
To enable the ILV, do the following:
1 Go to
Parameters
>
Interleaving
>
Combiner S/N
.
2 Enter the serial no. of the ILV option (Combiner) into the
Combiner S/N
text field.
3 Restart the M8070B application. After the restart, the ILV mode will be
enabled.
To disable the ILV, do the following:
1 Go to
Parameters
>
Interleaving
>
Combiner S/N
.
2 Delete the serial no. in the
Combiner S/N
text field and press
Enter
.
3 Restart the M8070B application. After the restart, the ILV mode will be
disabled.
NOTE
The registered combiner serial no. is persistently stored on the module.
