manualshive.com logo in svg

Keysight Technologies X-Series, Programming Manual

The Keysight Technologies X-Series offers a comprehensive Programming Manual, available for free download from our website. This invaluable manual provides detailed instructions and guidelines to optimize the functionality and performance of your X-Series product. Upgrade your user experience with this essential tool, exclusively at manualshive.com.

Share
Download
background image

6

Contents

3. Programming Examples

Using the Programming Interface Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-62

Programming Examples Development Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-62
Running C++ Programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-63
Running C# Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-64
Running Basic Examples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-64
Running Java Examples  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-65
Running MATLAB Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-66
Running Perl Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-66

Using GPIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-67

Installing the GPIB Interface Card  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-67

GPIB Programming Interface Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-68

Before Using the GPIB Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-68
GPIB Function Statements (Command Messages)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-68
Interface Check using HP Basic and GPIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-72
Interface Check Using NI-488.2 and C++. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-73
Interface Check for GPIB Using VISA and C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-75
Local Lockout Using HP Basic and GPIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-76
Local Lockout Using NI-488.2 and C++ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-78
Queries Using HP Basic and GPIB  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-80
Queries Using NI-488.2 and Visual C++ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-82
Queries for GPIB Using VISA and C  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-85
Generating a CW Signal Using VISA and C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-88
Generating an Externally Applied AC-Coupled FM Signal Using VISA and C . . . . . . . . . . . . . . . . . . . . . . . . 3-91
Generating an Internal FM Signal Using VISA and C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-93
Generating a Step-Swept Signal Using VISA and C++  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-96
Generating a Swept Signal Using VISA and Visual C++  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-98
Saving and Recalling States Using VISA and C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-101
Reading the Data Questionable Status Register Using VISA and C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-104
Reading the Service Request Interrupt (SRQ) Using VISA and C  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-110

LAN Programming Interface Examples  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-115

VXI-11 Programming  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-115
VXI-11 Programming Using SICL and C++. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-116
VXI-11 Programming Using VISA and C++  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-118
Sockets LAN Programming and C  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-120
Queries for Lan Using Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-124
Sockets LAN Programming Using Java . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-150
Sockets LAN Programming Using Perl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-153
TCP-IP (LAN) Programming Using Matlab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-154

4. Programming the Status Register System

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-168

Overall Status Byte Register Systems  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-170

Status Register Bit Values  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-172

Example: Enable a Register  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-172
Example: Query a Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-172

Accessing Status Register Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-173

Summary of Contents for X-Series















































































































































































































































































































































































































Reviews:

No comments

Related manuals for X-Series

AccuEnergy Acuvim-L Series User Manual preview
Acuvim-L Series
Brand: AccuEnergy Pages: 83
ECO Sensors UV-100 User Manual preview
UV-100
Brand: ECO Sensors Pages: 22
ECO Sensors OS-6 User Manual preview
OS-6
Brand: ECO Sensors Pages: 7
F&F LE-01MR v2 User Manual preview
LE-01MR v2
Brand: F&F Pages: 24
IET Labs 1910 User And Service Manual preview
1910
Brand: IET Labs Pages: 114
OHAUS MB90 User Manual preview
MB90
Brand: OHAUS Pages: 52
National Instruments NI 9421 Getting Started Manual preview
NI 9421
Brand: National Instruments Pages: 18
Major tech MT975 Instruction Manual preview
MT975
Brand: Major tech Pages: 16
Zoetis AlphaTRAK Instructions For Use preview
AlphaTRAK
Brand: Zoetis Pages: 2
Energic Plus MPD-1007E Manual preview
MPD-1007E
Brand: Energic Plus Pages: 12
Osaka OI 22-V User Manual preview
OI 22-V
Brand: Osaka Pages: 3
SIKA MH3111 User Manual preview
MH3111
Brand: SIKA Pages: 8
Magnescale SR77 Supplement Manual preview
SR77
Brand: Magnescale Pages: 36
Niigata seiki WDI-3058SP Instruction Manual preview
WDI-3058SP
Brand: Niigata seiki Pages: 2
Eplus BL-H1 Instruction Manual preview
BL-H1
Brand: Eplus Pages: 17
Kawai CE220 Owner'S Manual preview
CE220
Brand: Kawai Pages: 72
STONEX R1 PLUS Manual preview
R1 PLUS
Brand: STONEX Pages: 20
Extech Instruments PQ3350 User Manual preview
PQ3350
Brand: Extech Instruments Pages: 45

Brands by name

Popular brands

Load more brands