54 Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide
Using IO Interfaces
Using LAN
2.
Type
Telnet
and press the
Enter
key (Command Prompt) or click
OK
(Run utility). The Telnet client screen will be displayed. See
3.
Type
open
at the prompt and then press the
Enter
key. The prompt will
change to (
to
).
4.
At the (
to
) prompt, enter the signal generator’s IP address followed by a
space and
5024
, which is the Telnet port associated with the signal
generator.
5.
At the
SCPI>
prompt, enter SCPI commands.
6.
To escape from the SCPI> session type
Ctrl-]
.
7.
Type
quit
at the prompt to end the Telnet session.
Figure 2-6
Telnet Command Prompt Window
The Standard UNIX Telnet Command
Synopsis
telnet
[
host
[
port
]]
Description
This command is used to communicate with another host using the Telnet
protocol. When the command
telnet
is invoked with
host
or
port
arguments, a connection is opened to the host, and
Summary of Contents for X-Series
Page 4: ...4 ...
Page 10: ...10 Contents ...
