Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide 101
Programming Examples
GPIB Programming Interface Examples
intCounter = intCounter-1;
}
printf("End of Program\n\n");
}
Saving and Recalling States Using VISA and C
In this example, instrument settings are saved in the signal generator’s save
register. These settings can then be recalled separately; either from the
keyboard or from the signal generator’s front panel. Launch Microsoft Visual
C++ 6.0, add the required files, and enter the following code into your .cpp
source file.
visaex8.cpp
performs the following functions:
— error checking
— clears the signal generator
— resets the status byte register
— resets the signal generator
— sets up the signal generator frequency, ALC off, power level, RF output on
— checks for operation complete
— saves to settings to instrument register number one
— recalls information from register number one
— prompts user input to put instrument into Local and checks for operation
complete
The following program example is available on the signal generator
Documentation CD-ROM as
visaex8.cpp
.
//*****************************************************************
// PROGRAM FILE NAME:visaex8.cpp
//
// PROGRAM DESCRIPTION:In this example, instrument settings are
saved in the signal
// generator's registers and then recalled.
// Instrument settings can be recalled from the keyboard or, when
the signal generator
// is put into Local control, from the front panel.
// This program will initialize the signal generator for an
instrument state, store the
// state to register #1. An *RST command will reset the signal
generator and a *RCL
// command will return it to the stored state. Following this remote
operation the user
Summary of Contents for X-Series
Page 4: ...4 ...
Page 10: ...10 Contents ...
