Keysight Technologies NFA X-Series Getting Started And Troubleshooting Manual Download Page 58

Page: 58 / 99

58 Keysight NFA X-Series Getting Started and Troubleshooting Guide

Instrument Operating System
Windows Security

Virus Protection

There is no antivirus software included with your instrument. To find
information regarding recommended antivirus software, visit the NFA website:

http://www.keysight.com/find/nfa

and select FAQs under Technical Support.

Spyware Protection

There is no anti-spyware software installed on the instrument. This should not

be a problem if you do not use the instrument for a lot of internet browsing.

Having spyware in the instrument could have an impact on the instrument

performance.

Having antivirus software installed may have a slight impact on the

instrument performance.

Summary of Contents for NFA X-Series




































































































Search results

Summary of Contents for NFA X-Series

Reviews:

Related manuals for NFA X-Series

Brands by name

Popular brands

Keysight Technologies NFA X-Series, Getting Started And Troubleshooting Manual

Search results

Summary of Contents for NFA X-Series

Reviews:

Related manuals for NFA X-Series

Brands by name

Popular brands