Keysight Technologies NFA X-Series Getting Started And Troubleshooting Manual Download Page 59

Page: 59 / 99

Keysight NFA X-Series Getting Started and Troubleshooting Guide 59

Instrument Operating System
System Maintenance

System Maintenance

Backup

It is recommended that you have a regular backup strategy. Your IT

department may already have a backup strategy in place which is suitable for

the instrument and its data. Using the Instrument Recovery system in

conjunction with a regular backup strategy should allow full recovery of the

instrument data.
Windows has a Backup utility that you can use to archive files and folders in

case of a disk drive failure. See the Windows Help and Support Center for more

information on this utility. You can also use third party backup utilities.

However, you must ensure that this third party software is compatible with the

instrument's system software.
When performing backups, we recommend that you backup the data to an

external storage device connected to the network or one of the instrument's

USB connectors. Also, you should perform backups at times when the

instrument is not being used for normal operations, as it may impact the

instrument's overall performance.

System Restore

Windows contains the capability to restore the system to a previous point in

time. System Restore is enabled with default settings as provided by Microsoft.

However, System Restore is not always 100% successful. Therefore, it is not

recommended that you rely on System Restore to protect your instrument.

System Restore has not been tested to verify successful restoring.

Disk Defragmenting

The instrument has a solid state drive. Disk defragmenting is not

recommended.

Summary of Contents for NFA X-Series




































































































Search results

Summary of Contents for NFA X-Series

Reviews:

Related manuals for NFA X-Series

Brands by name

Popular brands

Keysight Technologies NFA X-Series, Getting Started And Troubleshooting Manual

Search results

Summary of Contents for NFA X-Series

Reviews:

Related manuals for NFA X-Series

Brands by name

Popular brands