Keysight Technologies NFA X-Series Getting Started And Troubleshooting Manual Download Page 51

Page: 51 / 99

Keysight NFA X-Series Getting Started and Troubleshooting Guide 51

Instrument Operating System
Windows Configuration

Windows Configuration

The Windows settings have been optimized for the best measurement

performance. Any modifications to these settings may degrade instrument

performance and measurement speed. In general, most Windows System

settings (typically set through the Windows Control Panel) should not be

modified. Those that can be safely modified are listed below.

Settings that can be changed

You may change the following Windows settings or administrative tasks

(available from the Windows Control Panel) to suit your own personal

preferences. It is recommended that you document any changes to the

instrument’s configuration in case an Instrument Recovery is performed and

the configuration is reset.

To recover from problems caused by changing Windows Systems settings,

you may have to reinstall the Windows system and instrument

applications using the Instrument Recovery process.

Some of these actions can only be performed with Administrator

privileges.

Table 3-1

You May Use This Feature:

To Do This…

Configure Microsoft Windows Automatic Updates.
Microsoft recommends that you always get the latest critical Windows

updates to ensure that the instrument's Windows operating system is

protected. If the instrument has Internet access, the instrument default is

set to automatically check for critical Windows Updates and notify you.

Setup new user accounts.

Do not delete or modify the "KeysightOnly"

user account. Doing so may prevent Keysight

from servicing the instrument.

Add the Instrument to a network

Install and configure a printer

Set the time and date

Summary of Contents for NFA X-Series




































































































Search results

Summary of Contents for NFA X-Series

Reviews:

Related manuals for NFA X-Series

Brands by name

Popular brands

Keysight Technologies NFA X-Series, Getting Started And Troubleshooting Manual

Search results

Summary of Contents for NFA X-Series

Reviews:

Related manuals for NFA X-Series

Brands by name

Popular brands