Keysight Technologies NFA X-Series Getting Started And Troubleshooting Manual Download Page 71

Page: 71 / 99

Keysight NFA X-Series Getting Started and Troubleshooting Guide 71

Using Windows Tools
Remote Desktop: Using the X-Series Instruments Remotely

Remote Desktop: Using the X-Series Instruments Remotely

Windows Remote Desktop is recommended for remote control of the

instrument. It offers fully-interactive control that is almost identical to direct

face-to-face control of the instrument. You can also remotely control the

instrument using the Embedded Web Server interface. The Embedded Web

Server functionality provides a communications method that does not require

recommended for setup and data exchanges that do not involve instrument

control.

You need an external keyboard and mouse to fully use this functionality.

Overview of Remote Desktop operation

Using the Remote Desktop functionality of the instrument allows you to control

and interact with the instrument from a remote computer as though you were

sitting in front of the instrument.
When you have configured the instrument for remote connectivity, and

configured a separate computer to act as a Remote Desktop Host, you can

send commands to the instrument from the remote computer, and you can see

the instrument display on the screen of the remote computer.
This section provides full details of how to set up the instrument for remote

connectivity, and also how to set up a computer running any version of

Microsoft Windows as a Remote Desktop Host.

The Remote Desktop functionality is a Microsoft Windows 10 capability.

The following discussion provides some guidelines for using this

capability with the instrument. You need to refer to the Windows 10 help

documentation for more information. As Windows evolves, these

instructions may no longer be exact.

Summary of Contents for NFA X-Series




































































































Search results

Summary of Contents for NFA X-Series

Reviews:

Related manuals for NFA X-Series

Brands by name

Popular brands

Keysight Technologies NFA X-Series, Getting Started And Troubleshooting Manual

Search results

Summary of Contents for NFA X-Series

Reviews:

Related manuals for NFA X-Series

Brands by name

Popular brands