manualshive.com logo in svg

Keysight Technologies NFA X-Series, Getting Started And Troubleshooting Manual

Share
Download
Keysight Technologies NFA X-Series Getting Started And Troubleshooting Manual Download Page 34

 34                                                                Keysight NFA X-Series Getting Started and Troubleshooting Guide

Front and Rear Panel Features
Front-Panel Features

Front-Panel Features

Item

Description

#

Name

1

Pouch

2

Measurement Keys

These keys (in the shaded area) enable you to set the parameters used for 

making measurements in the current Mode and Measurement.

3

Mode/Measurement Key

This key enables you to select the desired Mode (measurement application), 

Measurement, and/or View.

4

Preset Keys

Mode Preset - local to the current mode, global to all measurements in the 

mode, affects most but not all parameters in the mode, does not affect 

Input/Output or System variables 
User Preset - local to the current mode, global to all measurements in the 

mode, affects all parameters in the mode as well as the Input/Output 

variables. Does not affect System variables.

Summary of Contents for NFA X-Series




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands