Keysight Technologies N8262A P Series, User Manual

Page: 36 / 147

1 Introduction
36 Keysight N8262A User’s Guide
29 This table shows the width of the gate
Δ
T: (time between the markers), the
average, peak, and peak-to-average ratio power measurements within the
active gate.
Figure 1-7 Trace display in single enlarged window in trigger delay mode
Figure 1-7 shows a single enlarged window with the Gate Ctrl menu and
associated tables and trigger delay.
30 Clicking removes the gate markers and displays the trigger
marker(s). The indicates when the trigger event occurs, whilst shows the
delayed trigger point. When the two points coincide only the trigger is
shown.
In the example shown in Figure 1-7 , the appears ahead of the as a trigger
delay of
–
5.00 µs has been configured, placing the measurement trigger before
the trigger event. You can configure the trigger delay by pressing and entering a
numeric value.
To indicate an off-screen trigger event, is displayed. To indicate an off-screen
trigger point, is displayed.
31 The selected channel and gate number is displayed.
32 The trigger setting and slope is displayed. Examples shown in Figure 1-7 are
Internal Channel A and a Positive Slope.
31
32
30
Select TgDel