Keysight Technologies N2797A, User Manual

Page: 32 / 48

32 N2797A User’s Guide
3
Characteristics and Specifications
Table 8 Electrical Characteristics and Specifications
Parameter Characteristic or Specification (where indicated)
Bandwidth (–3 dB)
a
1.5 GHz (specification)
Rise Time (10% – 90%, calculated) 233 ps
System Bandwidth (with Keysight oscilloscope) 1 GHz (with Keysight’s 1 GHz InfiniiVision or Infiniium
oscilloscope)
Attenuation Ratio (at DC) 10:1 ± 0.5%
Input Dynamic Range –8V to +8V (DC or Peak AC)
Non-Destructive Maximum Input Voltage –20V to +20V
Offset Range ±12V
DC Offset Error (Output Zero) < ±1 mV
Flatness (at 25° C) Typical 0.3 dB (10 Hz – 100 MHz)
Typical 0.8 dB (100 MHz – 1 GHz)
Typical 2.0 dB (1 GHz – 1.5 GHz)
Flatness Over Temperature (–40° C to +85° C) Typical 0.3 dB (10 Hz – 100 kHz)
Typical 0.6 dB (100 kHz – 100 MHz)
Typical 0.8 dB (100 MHz – 500 MHz)
Typical 2.0 dB (500 MHz – 1 GHz)
Typical 2.5 dB (1 GHz – 1.5 GHz)
Input Resistance
a
1 M
Ω
± 3% (specification)
Input Capacitance 1 pF
Probe Noise < 2.5 mV
rms
(referred to input)
Output Impedance 50
Ω
Internal Power Keysight AutoProbe interface from oscilloscope
(InfiniiVision and Infiniium)
a Denotes warranted electrical specification at 25 °C room temperature after 20 minute warm-up. All others are typical.