Keysight Technologies N2797A, User Manual

Page: 8 / 48

8 N2797A User’s Guide
1
Using the Probe
Probe Headlight
The probe is equipped with a white LED headlights to illuminate the area around the probe
tip. This headlight has a fixed intensity and is turned on and off by pressing the button that
is located on the probe’s body.
Figure 1 Headlights and Button
Channel-Identification Rings
When multiple probes are connected to the oscilloscope, the channel identification rings
(yellow, green, blue, and purple) allow you to quickly determine which channel input is
associated with each probe. On the probe, place one colored ring near the probe’s channel
connector and place an identical color ring near the probe head.
Supplied Accessories
The probe comes with the accessories shown in Figure 2 .
CAUTION
All of the supplied accessories can be used at the probe’s specified extreme temperature range of –40°C
to +85°C (–40°F to +185°F) except the flex nose clip and pico hook tips. These adapters have a slightly
reduced temperature range of –20°C to +80°C (–4°F to +176°F).