18
N2797A User’s Guide
1
Using the Probe
9 cm Y-Leads
with
0.1” Headers
Like the 6 cm Y-leads, the 9 cm Y-leads offer a convenient and
reliable method to connect both the probe signal and ground to
probe points on the board via or the solderable pins that are provided
with each probe. The added convenience of the longer leads results
in a slightly reduced bandwidth. The bandwidth with accessory is
800 MHz.
The sockets accept 0.56 to 0.86 mm round and 0.64 mm square (0.022 to 0.034 inch round
and 0.025 inch square) diameter pins. The maximum insertion depth is 7.5 mm (0.295 inch)
and the outer insulation of the socket is less than 2.54 mm. You can use it for 2.54 mm pitch
(0.1 inch) terminals.
Figure 7
Probe with Y-Leads Attached
Summary of Contents for N2797A
