Chapter 2
17
Operation
Performing Open and Short Correction
Performing Short Correction
The short correction procedure is as follows.
1. Push the HIGH side contact pin’s knob to the left to make firm contact with the LOW
side contact pin (
Figure 2-2
). Tighten the contact pin locking screw to secure the HIGH
side contact pin.
Figure 2-2
Contact pin position for short correction
2. Perform the short correction as described in the specific instrument’s manual.
Summary of Contents for 16034G
