Keysight Technologies 16034G, Operation Manual

Page: 23 / 27

Chapter 3 23
Specifications and Supplemental Performance Characteristics
Supplemental Performance Characteristics
Supplemental Performance Characteristics
This section provides useful data on the 16034G. These supplemental performance
characteristics should not be considered specifications.
Frequency Range
With OPEN/SHORT correction  3 MHz
With OPEN/SHORT/LOAD correction  120 MHz
Additional Errors (With OPEN/SHORT correction)
Additional errors are calculated as follows.
|Z| Measurement
Additional error Ze [%] of the |Z| measurement is calculated by substituting the
values in the table below into the following equation.
Ze

[%] = ± {A + (Zs/Zx + Yo × Zx) × 100}
where
A [%] Additional Error (Proportional Error)
Zs [

] Short Repeatability (Impedance)
Yo [S] Open Repeatability (Admittance)
Zx [

] Measured Value (Impedance)
where f is frequency (MHz).
D Measurement
Additional error De of the D measurement is calculated by additional error Ze [%]
of |Z| measurement as follows.
If Dx

0.1:
De = Ze / 100
If 0.1

Dx

0.5:
De = ( Ze / 100) × (1 + Dx)
Zs
{10 + 13 × ( f / 10 )} × 10
-3
[

]
Yo
{5 + 500 × ( f / 10 )} × 10
-9
[S]
A
0.5 × ( f / 10 )
2
[%]