Keysight Technologies 16034G, Operation Manual

Page: 4 / 27

4
Notices
The information contained in this document is subject to change without notice.
This document contains proprietary information that is protected by copyright. All
rights are reserved. No part of this document may be photocopied, reproduced, or
translated to another language without the prior written consent of the Keysight
Technologies.
Keysight Technologies Japan, Ltd.
Component Test PGU-Kobe
1-3-3 Higashikawasaki-cho, Chuo-Ku Kobe-shi, Hyogo, 650-0044 Japan
© Copyright Keysight Technologies Japan, Ltd. 1999, 2001, 2015
Manual Printing History
The manual’s printing date and part number indicate its current edition. The
printing date changes when a new edition is printed. (Minor corrections and
updates incorporated in reprints do not necessitate a new printing date.) The
manual part number changes when extensive technical changes are incorporated.
January 1999 Edition 1 (part number: 16034-90001)
April 1999 Edition 2 (part number: 16034-90011)
December 1999 Edition 3 (part number: 16034-90011)
January 2001 Edition 4 (part number: 16034-90011)
March 2015 Edition 5 (part number: 16034-90011)
November 2016 Edition 6 (part number: 16034-90011)
Safety Summary
The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument. Failure to comply with these
precautions or with specific WARNINGS elsewhere in this manual may impair the
protection provided by the equipment. Such noncompliance would also violate
safety standards of design, manufacture, and intended use of the instrument.
Keysight Technologies assumes no liability for the customer’s failure to comply
with these requirements.