manualshive.com logo in svg

Kettler Quadriga Duo Speed 45, Operating And Maintenance Instructions Manual

Share
Download
Kettler Quadriga Duo Speed 45 Operating And Maintenance Instructions Manual Download Page 85

MY20K10 - 12_1.0_11.01.2021

85

Cleaning and servicing

7.2.6

Cleaning the battery  

Clean the battery electrical connections with a 
dry cloth or paintbrush only. 

Wipe off the decorative sides with a damp 
cloth.

7.2.7

Cleaning the on-board computer 

Carefully clean the on-board computer with a 
soft, damp cloth.

7.2.8

Cleaning the motor 

Carefully clean the motor with a soft, damp 
cloth.

7.2.9

Cleaning the brake

Clean brake and brake discs with a brush, 
water and dish-washing detergent.

Clean brake discs thoroughly with brake 
cleaner or spirit.

7.2.10 Cleaning the saddle 

Clean the saddle with lukewarm water and a 
cloth dampened with natural soap.

Risk of fire and explosion due to penetration by 
water

The battery is only protected from simple spray 
water. Penetration by water can cause a short 
circuit. The battery may self-ignite and explode.

Never clean the battery with a pressure 
washer, water jet or compressed air.

Keep contacts dry and clean. 

Never immerse the battery in water.

Never use cleaning agents.

Remove the battery from the S pedelec before 
cleaning.

Notice

Never clean the battery with cleaning agents 
or with solvents, such as oil, thinners, alcohol 
or corrosion protection.

Notice

If water enters the on-board computer, it will be 
permanently damaged.

Never immerse the on-board computer in 
water.

Never clean with a pressure washer, water jet 
or compressed air.

Never use cleaning agents.

Remove the on-board computer from the 
S pedelec before cleaning.

CAUTION

!

Notice

If water penetrates the motor, it will be 
permanently damaged.

Never immerse the motor in water.

Never clean with a pressure washer, water jet 
or compressed air.

Never use cleaning agents.

Brake failure due to water penetration

The brake seals are unable to withstand high 
pressures. Damaged brakes can fail and cause 
an accident with injury.

Never clean the S pedelec with a pressure 
washer or compressed air.

Take great care when using a hosepipe. Never 
point the water jet directly at the seal section. 

Notice

Never clean with a pressure washer.

Never clean with solvent or chemical agents.

WARNING

!

Summary of Contents for Quadriga Duo Speed 45

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands