MY20K10 - 12_1.0_11.01.2021
43
Assembly
2
Tighten the axle with the red handle.
Figure 43: Tightening the axle
3
Push the quick release lever into the axle.
Figure 44: Pushing the quick release lever into the axle
4
Turn the quick release lever.
The lever is secured.
Figure 45: Securing the lever
5
Check the position and clamping force of the
quick release lever. The quick release lever
must be flush with the lower housing. You must
be able to see a slight impression on the palm
of your hand when you close the quick release
lever.
Figure 46: Perfect position for the clamping lever
6
Use 4 mm hexagon socket spanner to adjust
the clamping lever clamping force if required.
7
Check the quick release lever position and
clamping force.
Figure 47: Adjusting the quick release clamping force
